Documentation

Using Privex

Everything you need to move ETH and USDG onto Robinhood Chain, and back out, with Privex.

Overview

Privex is a non-custodial bridge interface for Robinhood Chain. You deposit on the network your funds are on, and a solver that already holds liquidity on the destination pays you out there, usually within seconds. You sign every transaction in your own wallet; Privex never holds funds or keys.

Routes run in both directions: into Robinhood Chain from 13 networks, and out of Robinhood Chain to any of them.

Quick start

  1. Open the app. Go to privex.ink/app. The form starts on ETH on Base → ETH on Robinhood Chain.
  2. Pick the route. Choose the token you send and the token you receive. Each selector opens a list of networks and their tokens.
  3. Enter an amount. A live quote appears with the rate, fees, price impact, the minimum you’ll receive and an estimated time. It refreshes every 25 seconds.
  4. Connect a wallet. The button asks for the wallet the origin network needs. The recipient fills in from your connected wallet; use Edit to send somewhere else.
  5. Sign once. Confirm in your wallet. The progress panel and the Activity list follow the transfer until it’s delivered.

Open the app

Networks & tokens

These are the tokens Privex lists. Every route is confirmed by a live quote before you sign; if a pair isn’t available at that moment, the app tells you instead of guessing.

NetworkTokenContractDecimals
Robinhood ChainRobinhood ChainETH EtherNative18
USDG Global Dollar0x5fc5…d1686
EthereumEthereumETH EtherNative18
USDC USD Coin0xA0b8…eB486
USDT Tether USD0xdAC1…1ec76
BNB ChainBNB ChainBNB BNBNative18
USDC USD Coin0x8AC7…580d18
USDT Tether USD0x55d3…795518
BaseBaseETH EtherNative18
USDC USD Coin0x8335…29136
ArbitrumArbitrumETH EtherNative18
USDC USD Coin0xaf88…58316
USDT Tether USD0xFd08…Cbb96
OptimismOptimismETH EtherNative18
USDC USD Coin0x0b2C…Ff856
USDT Tether USD0x94b0…8e586
PolygonPolygonPOL PolygonNative18
USDC USD Coin0x3c49…33596
USDT Tether USD0xc213…8e8F6
SolanaSolanaSOL SolanaNative9
USDC USD CoinEPjFWd…Dt1v6
USDT Tether USDEs9vMF…wNYB6
AvalancheAvalancheAVAX AvalancheNative18
USDC USD Coin0xb97e…8a6e6
LineaLineaETH EtherNative18
USDC USD Coin0x1762…e1ff6
USDT Tether USD0xa219…2b936
MonadMonadMON MonadNative18
USDC USD Coin0x7547…b6036
USDT0 USDT00xe7cd…c82d6
HyperEVMHyperEVMHYPE HYPENative18
USDC USD Coin0xb883…630f6
USDT0 USDT00xb8ce…5ebb6
HyperliquidHyperliquidUSDC USDC (Perps)Native8
TRONTRONTRX TRONNative6
USDT Tether USDTR7NHq…Lj6t6

On Robinhood Chain the dollar stablecoin is USDG (Global Dollar). Sending USDC or USDT to Robinhood Chain lands as USDG at the rate on the quote. On BNB Chain, USDC and USDT use 18 decimals.

Fees

Every quote shows the full cost before you sign:

Network fee
Gas on the origin network, paid from your wallet.
Bridge fee
Covers the solver’s gas on the destination and the cost of fronting your funds.
Price impact
The difference from the market rate when the route also swaps tokens. Shown in amber above 1%.
Minimum received
The least you can receive. A fill below this amount does not happen.
Gas top-up
Optional. When you bridge a token like USDG, Privex can add $1 of the destination’s gas token so the recipient can move it right away. It is switched on automatically when the recipient has none, and the $1 comes out of the amount you send.

When you press Max, Privex leaves a little of the native token behind for gas (0.01 SOL on Solana, 0.002 of the native token on EVM networks).

Transfer status

Transfers appear in the Activity panel next to the form, with explorer links for each side. They are saved in your browser, and transfers still in flight resume tracking when you come back.

Submitting
Privex is preparing the transaction and waiting for your wallet.
Waiting
Your deposit was sent. Privex is waiting for it to be picked up.
Depositing
The deposit is being confirmed on the origin network.
Filling
A solver is paying you out on the destination network.
Retrying
The fill was delayed and is being retried automatically.
Delivered
Funds arrived at the recipient. The explorer link shows the payout.
Refunded
The fill could not complete, so the deposit went back to the wallet it came from.
Cancelled
You rejected the request in your wallet. Nothing was sent.
Failed
Something went wrong before the deposit. Nothing was sent unless an explorer link is shown.

Wallets

For Robinhood Chain and the other EVM networks, use MetaMask, Rabby, Coinbase Wallet or any WalletConnect wallet. For Solana, use Phantom, Solflare or Backpack. For TRON, use TronLink (or a wallet that works like it, such as the TRON side of OKX or Bitget Wallet). You can keep EVM, Solana and TRON wallets connected at the same time; Privex picks the right one for each step.

Your wallet can stay on any network. Right before an EVM step, Privex asks it to switch to the network that step needs.

Hyperliquid works with your EVM wallet. HyperEVM behaves like any other EVM network. Bridging out of your Hyperliquid perps account (USDC) takes two signatures and no gas: one that links the deposit to your order, and one that authorises the USDC transfer on Hyperliquid. Privex sends that transfer to Hyperliquid for you.

TRON transactions pay for energy and bandwidth in TRX. Keep some TRX in your TRON wallet (around 30 TRX covers an approval and a deposit) even when you bridge USDT. Max leaves 30 TRX behind for this.

Safety

  • Check the recipient address. Cross-chain transfers can’t be reversed.
  • Read the minimum received and total cost before you sign.
  • Start with a small amount on a route you haven’t used before.
  • Privex will never ask for your seed phrase or private key, by message or anywhere else.
  • Make sure the address bar says privex.ink before connecting a wallet.

Troubleshooting

“No route available”
The pair or amount can’t be routed right now. Try a different token, a smaller or larger amount, or try again in a few minutes.
“Amount is too low to cover bridge fees”
The bridge fee is larger than what you’re sending. Increase the amount.
“Insufficient …”
Your balance on the origin network is lower than the amount. Remember that gas is paid on top, so leave a little of the native token behind.
“Connection declined” in the wallet modal
Open your wallet extension and approve or reject any request that is still waiting, make sure the wallet is unlocked, then refresh the page and connect again.
My wallet asks to add or switch to Robinhood Chain
That’s expected the first time. Privex asks your wallet to switch to the right network just before you sign, and adds Robinhood Chain if your wallet doesn’t know it yet.
A transfer has been “Filling” for a long time
Keep the page open or come back later: Privex resumes tracking in-flight transfers when you return. If a fill can’t complete, the deposit is refunded automatically.

Still stuck? Email hello@privex.ink or reach us on X at @PrivexLayer with the transaction link from your Activity panel. We will never DM you first or ask for your keys.

Docs · Privex